Percent solution to mg/mL calculator
Convert a percent or ratio solution to mg/mL, dilute a stock solution to a lower strength, or work out how much 50% dextrose to add to a bag of fluids. Each step is worked out the way you’d write it.
Example
20mg/mL
2% (for example, lidocaine)
How the example works
- 2 × 10 mg/mL = 20 mg/mL2% means 2 × 10 mg/mL: each 1% is 1 g per 100 mL, which is 10 mg/mL
For study and for double-checking your own math. Follow the order and the product label. Check every result before giving a drug.
Worked examples
Lidocaine comes as a 2% solution. What is that in mg/mL?
- 2 × 10 mg/mL = 20 mg/mL2% means 2 × 10 mg/mL: each 1% is 1 g per 100 mL, which is 10 mg/mL
2% lidocaine is 20 mg/mL. A 1% solution holds 1 g in 100 mL, which is 1,000 mg in 100 mL, or 10 mg/mL.
The order is to make a 1,000 mL bag of fluids 2.5% dextrose, using 50% dextrose.
- 1,000 mL × 2.5% ÷ 50% = 50 mLC1 × V1 = C2 × V2, with the bag volume as V2
Take 50 mL out of the bag, then add 50 mL of 50% dextrose. The bag stays at 1,000 mL, so it comes out at 2.5%. Adding 50 mL without removing any gives about 2.38%.
Common concentrations
Percent here means weight in volume: grams per 100 mL. Many US labels print only mg/mL, so the percent or ratio for those is worked out from it.
| Drug | Strength | mg/mL | Product label |
|---|---|---|---|
| LidocaineXylocaine | 2% | 20 | Xylocaine prints % and mg/mL |
| BupivacaineSensorcaine | 0.5% | 5 | Sensorcaine prints % and mg/mL |
| PropofolPropoFlo | 1% | 10 | PropoFlo prints mg/mL |
| AcepromazinePromAce | 1% | 10 | PromAce prints mg/mL |
| KetamineKetaset | 10% | 100 | Ketaset prints mg/mL |
| Calcium gluconateCalcium Gluconate Injection | 10% | 100 | Calcium Gluconate Injection prints mg/mL |
| Sodium bicarbonate (1 mEq/mL)NeogenVet Sodium Bicarbonate | 8.4% | 84 | NeogenVet Sodium Bicarbonate prints % and mg/mL |
| MannitolMannitol 20% | 20% | 200 | Mannitol 20% prints % |
| Dextrose50% Dextrose | 50% | 500 | 50% Dextrose prints % |
| EpinephrineEpinephrine Injection 30 mL | 1:1,000 | 1 | Epinephrine Injection 30 mL prints mg/mL |
| EpinephrineEpinephrine Injection 1 mg/10 mL | 1:10,000 | 0.1 | Epinephrine Injection 1 mg/10 mL prints mg/mL |
Each product links to its label on DailyMed (US National Library of Medicine). US epinephrine labels now print mg/mL, not ratios, so be ready to convert a ratio yourself. Lidocaine and bupivacaine also come with added epinephrine; this table is the plain products.
How it’s calculated
- Percent to mg/mL: multiply by 10. 1% is 1 g in 100 mL, which is 10 mg/mL.
- Ratio to mg/mL: 1:x means 1 g in x mL, so divide 1,000 by x. 1:1,000 is 1 mg/mL and 1:10,000 is 0.1 mg/mL.
- Diluting a stock: C1 × V1 = C2 × V2. The volume of stock you need is the final concentration times the final volume, divided by the stock concentration. The rest of the final volume is diluent.
- Dextrose in a bag: the same formula, with the bag volume as the final volume. Remove that much fluid from the bag first, then add the dextrose, so the bag stays at its labeled volume and the percent comes out as calculated. Bags are often slightly overfilled, so treat the result as a close approximation.
- SourceBrashear M. Medical mathematics: dosing with precision. Vet Times, 2016
- SourceUniversity of Michigan Animal Care and Use Program. Pharmaceutical calculations for diluting and combining drugs
- SourceDailyMed. Epinephrine Injection 30 mL vial (listed as EPINEPHrine 1 MG/ML (1:1000) Injectable Solution)
Common mistakes
- Treating a percent as mg/mL. 2% is 20 mg/mL, not 2 mg/mL. The volume comes out 10 times too high.
- Mixing up 1:1,000 and 1:10,000 epinephrine. One is ten times stronger than the other.
- Adding dextrose without removing fluid. 50 mL of 50% added to a full 1,000 mL bag gives 2.38%, not 2.5%.
- Trying to dilute up. Diluting only lowers the concentration. If the final strength is higher than the stock, check the order.
- Forgetting the label. Label any bag you add to with what was added, the new concentration, the date, the time and your initials (Vet Times).
Practice this
Percent, ratio, dilution and dextrose problems. Type your answer to see the worked solution.
Percents and dilutions
You need 20 mL of ketamine at 10 mg/mL. You have ketamine at 100 mg/mL.
How many mL of the 100 mg/mL ketamine do you use? Round to 1 decimal place.
Practice numbers, not a dosing reference.
More topics, including doses, CRIs and fluids: vet tech math practice. For drug doses, use the dose calculator.
Practice for the VTNE
Pharmacy and pharmacology is 20 of the 150 scored questions on the VTNE, and calculations like these come up in anesthesia and emergency care too.