Skip to content
Vet Tech Practice

Veterinary dose calculator

Enter the patient’s weight, the dose and the concentration on the label. You get the amount of drug and the volume to draw up (or the number of tablets), with each step worked out the way you’d write it.

Entries

As written on the order.

Drug comes as

From the label. Pick the unit the label uses.

Example

2.2mL

25 kg at 4.4 mg/kg, 50 mg/mL

How the example works

  1. 25 kg × 4.4 mg/kg = 110 mg
  2. 110 mg ÷ 50 mg/mL = 2.2 mL

For study and for double-checking your own math. Doses come from the prescribing veterinarian. Check every result before giving a drug.

Worked example

A 35 kg dog is to receive lidocaine at 2 mg/kg. The vial is a 2% solution. How many mL do you draw up?

  1. 35 kg × 2 mg/kg = 70 mg
  2. 2 × 10 mg/mL = 20 mg/mL2% means 2 × 10 mg/mL: each 1% is 1 g per 100 mL, which is 10 mg/mL
  3. 70 mg ÷ 20 mg/mL = 3.5 mL

Draw up 3.5 mL. The percent has to become mg/mL before the last step, because mg can only be divided by mg/mL.

How it’s calculated

Dose (mg) = weight (kg) × dose rate (mg/kg). Then volume (mL) = dose (mg) ÷ concentration (mg/mL), or tablets = dose (mg) ÷ tablet strength (mg).

Each unit has to cancel. kg cancels kg, then mg cancels mg, leaving mL. The steps above strike out each unit as it cancels, so you can see it happen. If a unit is left over, a conversion is missing.

  • Pounds to kilograms: divide by 2.2. The exact factor is 2.2046, a 0.2% difference that doesn’t change a dose you can draw up.
  • Doses per pound (common on US labels, such as 2 mg/lb): the weight stays in pounds.
  • mg and mcg: 1 mg = 1,000 mcg. The dose and the concentration have to use the same one.
  • Percent solutions: 1% means 1 g in 100 mL, which is 10 mg/mL. Multiply the percent by 10.
  • Ratio solutions: 1:1,000 means 1 g (1,000 mg) in 1,000 mL, which is 1 mg/mL; 1:10,000 is 0.1 mg/mL. Current US labels usually print mg/mL, but exam questions and older references still use ratios.

Common mistakes

  • Using pounds with a mg/kg dose. The dose comes out 2.2 times too high.
  • Mixing up mg and mcg. The error is a factor of 1,000.
  • Treating a percent as mg/mL. A 2% solution is 20 mg/mL, not 2 mg/mL, so the volume comes out 10 times too high.
  • Reading the wrong concentration. Some drugs come in more than one strength. Buprenorphine for cats comes as 1.8 mg/mL and 0.3 mg/mL, with different doses, and Merck warns not to confuse them.
  • Writing doses with trailing zeros or no leading zero. Write 2.2 mL, not 2.20 mL, and 0.5 mL, not .5 mL. FDA reports tenfold overdoses from both.

Practice this

Dose problems with real drugs and label concentrations. Type your answer to see the worked solution.

Doses and tablets

A 29.5-kg dog is to receive meloxicam at 0.2 mg/kg SC. The injection is 5 mg/mL.

How many mL do you draw up? Round to 2 decimal places.

mL

Practice numbers, not a dosing reference.

More topics, including CRIs and fluids: vet tech math practice.

Practice for the VTNE

Pharmacy and pharmacology is 20 of the 150 scored questions on the VTNE, and dose calculations are part of it.