VTNE domains / Diagnostic imaging
VTNE diagnostic imaging practice questions
Diagnostic Imaging is 9 of the 150 scored questions on the VTNE, about 6% of your score. Below is what the AAVSB outline says the domain covers, then 3 free practice questions with the answer explained and the source it was checked against.
What this domain covers
The tasks the AAVSB lists for Diagnostic Imaging, condensed from the 2026 VTNE candidate handbook:
- Apply anatomy, physiology and pathophysiology to this area.
- Produce and document diagnostic images and radiographs (not dental), following safety and quality protocols.
- Maintain imaging equipment and materials.
Free diagnostic imaging questions
Choose an answer, then open the explanation. These questions also appear in the free practice tests, which mix all ten domains.
Show answer and explanationAnswer and explanation
The answer
C. A thyroid shield and lead glasses, since the head can be exposed
Why
Merck warns that upper limb, cervical spine and skull studies in horses are particularly likely to expose the upper body and head of anyone holding the film, the detector or the horse. Large-animal exposures are sometimes high and the beam is more often horizontal. Thyroid shields are considered mandatory because the thyroid is extremely radiation-sensitive, and lead glasses are recommended to protect the eyes. Aprons and gloves are still required.
Why not the others
- A. A lead apron alone, since the head is outside the beam: An apron protects the trunk, but in these studies the head and neck are in the exposure path. Thyroid shields are mandatory and eye protection is recommended.
- B. A dosimeter badge under the apron instead of shielding: A dosimeter measures exposure; it does not reduce it. Merck says people taking radiographs should be monitored, and it requires shielding as well.
- D. Standing behind the horse to keep out of the beam: The holder can't step away: holding the detector puts them close to the beam by definition, so they need shielding rather than a different position.
Show answer and explanationAnswer and explanation
The answer
D. acoustically couple the transducer to the patient.
Why
An ultrasound transducer must be in contact with the patient and acoustically coupled to it with transmission gel. The transducer sends an ultrashort pulse of sound into the animal and then switches to receive the returning echoes. Echoes arise wherever the sound beam changes velocity between tissues of different density, so the gel's job is to let the pulse enter the body and the echoes return to the transducer.
Why not the others
- A. electrically ground the transducer.: Gel is not an electrical connection. Its purpose is acoustic: carrying sound between the transducer and the skin.
- B. sterilize the skin before scanning.: Gel does not sterilize or prepare the skin. It is a coupling medium for the sound beam.
- C. cool the transducer crystals during long abdominal scans.: Gel is not a coolant. It is there so sound can pass between the transducer and the patient.
Show answer and explanationAnswer and explanation
The answer
C. 10 cm
Why
Merck explains that scatter becomes a problem once the part being radiographed is 10 cm thick or more with film (15 cm with digital systems), because scattered x-rays add unwanted exposure. A grid, a thin plate of alternating lead and plastic strips, sits between the patient and the image receptor to absorb that scatter. Its efficiency is described by the grid ratio.
Why not the others
- A. 4 cm: 4 cm is well below the thickness where scatter starts to degrade a film image, so a grid isn't needed for that reason.
- B. 20 cm: 20 cm is past the threshold. A grid is already indicated from 10 cm with film, or 15 cm with digital.
- D. 30 cm: 30 cm is far past the threshold. Waiting that long would leave every part from 10 cm upward degraded by scatter.