Veterinary CRI calculator
Work out a syringe pump rate for a constant rate infusion, or how much drug to add to a bag of fluids. Enter the dose as it’s ordered, in mcg/kg/min, mcg/kg/hr or mg/kg/hr, and every conversion is shown as its own step.
Example
4mL/hr
20 kg at 0.01 mg/kg/hr, 0.05 mg/mL in the syringe
How the example works
- 20 kg × 0.01 mg/kg/hr = 0.2 mg/hr
- 0.2 mg/hr ÷ 0.05 mg/mL = 4 mL/hr
For study and for double-checking your own math. The dose comes from the prescribing veterinarian. Check every result, and have a colleague check any CRI, before it runs.
Worked examples
A 20 kg dog is ordered a drug at 5 mcg/kg/min. It has been diluted to 1,000 mcg/mL in a syringe. What rate do you set on the pump?
- 20 kg × 5 mcg/kg/min = 100 mcg/min
- 100 mcg/min × 60 min/hr = 6,000 mcg/hr
- 6,000 mcg/hr ÷ 1,000 mcg/mg = 6 mg/hr
- 1,000 mcg/mL ÷ 1,000 mcg/mg = 1 mg/mLPut the concentration in mg/mL to match the dose
- 6 mg/hr ÷ 1 mg/mL = 6 mL/hr
Set the pump to 6 mL/hr. Minutes become hours (× 60) and mcg become mg (÷ 1,000) before dividing by the concentration.
The same 20 kg dog is to receive lidocaine at 50 mcg/kg/min, added to a 1,000 mL bag running at 50 mL/hr. Lidocaine is 2%.
- 20 kg × 50 mcg/kg/min = 1,000 mcg/min
- 1,000 mcg/min × 60 min/hr = 60,000 mcg/hr
- 60,000 mcg/hr ÷ 1,000 mcg/mg = 60 mg/hr
- 2 × 10 mg/mL = 20 mg/mL2% means 2 × 10 mg/mL
- 60 mg/hr ÷ 50 mL/hr = 1.2 mg/mLThe bag has to hold this much drug per mL
- 1.2 mg/mL × 1,000 mL = 1,200 mg
- 1,200 mg ÷ 20 mg/mL = 60 mL
Remove 60 mL from the bag, then add 60 mL of 2% lidocaine. Check: 1,200 mg in 1,000 mL at 50 mL/hr is 60 mg/hr, which for 20 kg is 3 mg/kg/hr, or 50 mcg/kg/min.
How it’s calculated
- Drug per hour: weight (kg) × dose rate. A dose per minute is multiplied by 60, and mcg are divided by 1,000 to give mg/hr.
- Syringe pump: mL/hr = mg/hr ÷ concentration (mg/mL). Use the concentration actually in the syringe, after any dilution.
- Added to a bag: the bag has to hold (mg/hr ÷ fluid rate) mg in every mL. Multiply by the bag volume for the mg to add, then divide by the drug’s concentration for the mL.
- Remove an equal volume first, so the bag stays at its stated volume and the concentration comes out as calculated.
- Check against the written order: work back from what you draw up. mL added × concentration ÷ bag volume × fluid rate ÷ weight is the dose delivered. Every result shows this in both mg/kg/hr and mcg/kg/min, so a wrong unit stands out against the order.
- Pounds to kilograms: divide by 2.2. The exact factor is 2.2046, a 0.2% difference.
Safety with a drug in the fluid bag
Once a drug is in the bag, the dose is tied to the fluid rate. If anyone changes the fluid rate, gives a bolus or flushes from that bag, the drug dose changes with it.
- Never bolus or flush from a bag with a drug added. AAHA says never to bolus fluids supplemented with potassium chloride.
- Use pump settings or a syringe pump as a safeguard with highly supplemented fluids and potassium CRIs, as AAHA recommends, so nothing is given by accident.
- Label the bag with the drug, the amount added, the concentration, the date, the time and your initials.
- Recalculate the dose being delivered whenever the fluid rate changes.
Common mistakes
- Forgetting the × 60. A dose per minute run as if it were per hour is 60 times too low.
- Mixing mcg and mg. The error is a factor of 1,000.
- Using the stock concentration after diluting. If you diluted the drug in the syringe, the pump rate has to use the diluted concentration.
- Adding drug without removing fluid. The bag ends up larger and the concentration lower than calculated.
Practice this
Syringe pump and fluid bag problems. Type your answer to see the worked solution.
CRIs
A 15-kg dog is on dobutamine at 5 mcg/kg/min. It has been diluted to 1,000 mcg/mL in a syringe.
What pump rate do you set, in mL/hr? Round to 1 decimal place.
Practice numbers, not a dosing reference.
More topics: vet tech math practice. For fluid rates, use the fluid rate calculator.
Practice for the VTNE
Calculating constant rate infusions is a listed task in the VTNE’s pharmacy and pharmacology domain, which is 20 of the 150 scored questions.